A quote from that page:
"This operation is only for the MK1 DL1, the accelerometers in the MK2 unit can not be recalibrated"
Best regards,
Thomas
Accelerometer Calibration
Yes, saw that when it was too late.
Turns out that you can "level" the DL1mkII by doing some combo of pressing "C" and space or enter. Not documented, so I'm not sure exactly what it takes, but I somehow got it set to about 30 degrees off of level, and have it fixed now by following the same procedure.
Turns out that you can "level" the DL1mkII by doing some combo of pressing "C" and space or enter. Not documented, so I'm not sure exactly what it takes, but I somehow got it set to about 30 degrees off of level, and have it fixed now by following the same procedure.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 18 guests