Dash2 error
Dash2 error
My Dash2 stopped working after a reflash.
Now i can't reflash it eihter by DL1 or Com1. Is there any way of reset the Dash2 or push up new firmware?
/Pär
Pär Hellqvist
Experience Driving Endurance
Tel +46 (0)8 580 116 35
Fax +46 (0)10 588 64 99
Mobile +46 (0)709 50 40 00
par(at)ederacing.se
www.ederacing.se
Experience Driving Endurance
Tel +46 (0)8 580 116 35
Fax +46 (0)10 588 64 99
Mobile +46 (0)709 50 40 00
par(at)ederacing.se
www.ederacing.se
Support wrote:Try pressing and holding the ‘UP’ button as the unit is turned on, when the fog light comes on release the up button then try to re-flash from the DL1 or PC.
Hi,
the trick with pressing up button to reflash works out well, but when i use the version "DASH2 customer reflash 9 1 9 090907" available on your site the Dash wont work, but when i use an old version "DASH2 customer reflash 9 2 0 071122" the dash starts working.
I think i have from your point of view an quit old dash from 2006. Do you think it might be an compability problem?
Please send me the latest working firmware.
Regards
Pär
Pär Hellqvist
Experience Driving Endurance
Tel +46 (0)8 580 116 35
Fax +46 (0)10 588 64 99
Mobile +46 (0)709 50 40 00
par(at)ederacing.se
www.ederacing.se
Experience Driving Endurance
Tel +46 (0)8 580 116 35
Fax +46 (0)10 588 64 99
Mobile +46 (0)709 50 40 00
par(at)ederacing.se
www.ederacing.se
-
- Posts: 110
- Joined: Wed Jul 04, 2007 11:33 pm
- Location: Toronto, Canada
- Contact:
I'be has this problem recently with several units. The first time I reflash it messes up the unit. However, the second time I reflash it works perfectly. I am told it is virtually impossible to mess up the Dash2 with a reflash. So I keep trying and eventually it works.
I suspect is might be to do with USB Serial converters...
I suspect is might be to do with USB Serial converters...
Peter Carroll, Toronto, Canada
DL1 and Dash2 - http://DriversMeeting.com/pcarroll
DL1 and Dash2 - http://DriversMeeting.com/pcarroll
So what is the process to get an older firmware? I just did the same thing with this newer file and I'm locked up now.
Thanks,
Brian
Thanks,
Brian
Hanchey
www.vorshlag.com
www.vorshlag.com
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 20 guests