Page 1 of 1
Import CSV?
Posted: Tue Jun 16, 2009 4:33 pm
by Dan in Saint Louis
Has anyone worked out a way to import CSV files such as might be generated by other types of data logger? I have some with as many as 30,000 lines of ASCII data and frankly they choke Excel<G>!
Thank you.
Posted: Wed Jun 17, 2009 12:39 pm
by Support
Hi,
I'm not clear on the question, do you mean you've exported data from the RT analysis package, or you want to read in CSV data into the RT analysis package?
Thanks,
Support
Posted: Wed Jun 17, 2009 4:48 pm
by Dan in Saint Louis
Support wrote:Hi,
I'm not clear on the question, do you mean you've exported data from the RT analysis package, or you want to read in CSV data into the RT analysis package?
Thanks,
Support
The second -- I have data saved as CSV by a different manufacturer's data logger but I like the R-T software. Thanks!
Posted: Thu Jun 18, 2009 2:57 pm
by Support
Hi Dan,
I'm glad you've "seen the light" and want to upgrade to Race Technology, however we don't allow CSV files to be imported into our software as don't want to end up supporting other peoples equipment. OUr software can only read in our format of binary files. If you are determined enough the format of the binary files is fully docuemented on our knowledge base but it would be lots of work and in breach of our softare licence conditions.
Really sorry! Sounds like you need a DL1 to me
Andy
Posted: Thu Jun 18, 2009 6:49 pm
by Dan in Saint Louis
Support wrote:Really sorry! Sounds like you need a DL1 to me
Andy
I have one, which how I know that I prefer your software<G>. We usually use it to study the wobble and weave characteristics of motorcycles.
Re: Import CSV?
Posted: Mon Oct 22, 2018 1:37 pm
by phantomjock
Old thread - new question.
OK, I "get it" I can't import a CSV file into RT Analysis. I have a file that is a "Heat" file, from a simulation. It shows the same details as the (track) file when you view the throttle/braking/etc on the track background map. It is a Google Earth file and covers more area than the usual earth file when I load it in RT.
[Segment attached -- grossly over-zoomed.]
- computer sim of my vehicle on a specific track
- segment heat file.jpg (66.32 KiB) Viewed 10880 times
As I can't import the CSV to compare my track files to the simulation, is there a means to import this google file in lieu of the "live" online Google Map. Sounds a bit odd, but it wold give me a work around - other than a lot of analysis by hand. I want to improve my braking zones and this would be a quick means.
Thanks for your support!
Cheers - Jim
Re: Import CSV?
Posted: Wed Oct 24, 2018 12:55 pm
by racetec
Sorry, it is not something that is possible at this time.