Data feed through to DL2 card
Posted: Tue Jan 19, 2016 5:44 am
Hi All
I remember reading about feeding a serial datastream straight through the DL2 to its data card, which is how my current ECU data is logged.
The question is can I with an appropriately tagged data stream pass data through at a mush higher rate that the DL2 can capture normal data at.
EG. An Ardunio can capture shock position data at 1kHz pretty easily, but I would love to stick this data onto the DL2's data card so I can then play with the data in the analysis package. Otherwise I am having to write something up in MatLab to analyze the data.
Yes a DL3 would solve this issue, but the $ for 'playing games' don't make it a viable pathway.
Ta
Bill
I remember reading about feeding a serial datastream straight through the DL2 to its data card, which is how my current ECU data is logged.
The question is can I with an appropriately tagged data stream pass data through at a mush higher rate that the DL2 can capture normal data at.
EG. An Ardunio can capture shock position data at 1kHz pretty easily, but I would love to stick this data onto the DL2's data card so I can then play with the data in the analysis package. Otherwise I am having to write something up in MatLab to analyze the data.
Yes a DL3 would solve this issue, but the $ for 'playing games' don't make it a viable pathway.
Ta
Bill