Page 1 of 1
dash2+ MS1 Extra will they work
Posted: Tue Jul 02, 2013 9:10 am
by Rigo-rod
have anyone tryed dash 2 with ms1 extra serial and got it to work?
i have the dash2 with ms2 cabel have tryed to get it to work but not secceded yet
if you have got it to work how ?
best regards
Posted: Mon Jul 08, 2013 2:01 pm
by Support
Do you have any documentation to suggest that the output serial data stream from the MS1 and MS2 are the same?
Martin
Posted: Wed Jul 10, 2013 6:04 am
by Rigo-rod
Support wrote:Do you have any documentation to suggest that the output serial data stream from the MS1 and MS2 are the same?
Martin
im waiting for answer from megasquirt
Posted: Sat Jul 13, 2013 12:26 am
by Rigo-rod
nobody at any megasquirt pages seems to know.. so badly its looks like i have to sell my awsome dash2 plus the logger
becasue i vant use it
Posted: Sun Jul 14, 2013 7:26 pm
by Rigo-rod
im think i will need to sell it because i cant get it to work with ms1 or work at all
Posted: Mon Jul 15, 2013 8:38 am
by Rigo-rod
No the data is not the same. Ms2 sends a lot more data and it does it at a much faster baud rate.
so i cant runt ms1extra with dash 2 +dl1 damn..
i think i will be needed to sell my dash because it just have 4 analog output so its maby to few
Posted: Mon Jul 15, 2013 7:04 pm
by Rigo-rod
what exact do ypu need to make ms1 work with with your dash?
Posted: Fri Aug 23, 2013 4:18 pm
by thokes82
MS1 is totally different from MS2. It is 9600bps communication.
Here is the specification of the protocoll.
http://www.msextra.com/doc/ms1extra/COM_RS232.htm