RPM pick up
Posted: Tue Feb 19, 2013 10:11 pm
I have a Dl1 Mk2, Dash 3 full, OBD2 interface combo. I got the setup mostly working but can't get the RPM pick up right.
Info on DL1 setup
Dl1 draws power from a fused and separate line from the battery but shares it with 3 gauges, the Dash 3, and the OBD2 interface
Firmware version 29.6
My fundamental problem is that DL1 is logging an RPM variable that is wrong. With just the DL1 (Dash 3, and OBD2 interface disconnected) and RPM picked up from the Tach to rL input on the DL1, I log idle rpms of ~5000.
Here are my setup.bin parameters:
And here is the logged data, all at idle:
I am stumped as to what may be causing this. Do I need a firmware update? Help is appreciated.
Info on DL1 setup
Dl1 draws power from a fused and separate line from the battery but shares it with 3 gauges, the Dash 3, and the OBD2 interface
Firmware version 29.6
My fundamental problem is that DL1 is logging an RPM variable that is wrong. With just the DL1 (Dash 3, and OBD2 interface disconnected) and RPM picked up from the Tach to rL input on the DL1, I log idle rpms of ~5000.
Here are my setup.bin parameters:
And here is the logged data, all at idle:
I am stumped as to what may be causing this. Do I need a firmware update? Help is appreciated.