Ive been reading the other thread on this but it is not helping me. I think im missing a step ??
Ive loaded the gear ratios in and wheel circumference and I have an RPM feed that shows up in analysis 7.3.38 but iim not seeing anything about gears ??
Thanks
Andrew
Gear Not Displaying
-
- Posts: 220
- Joined: Thu Mar 15, 2007 3:41 pm
- Location: Norwich, UK
- Contact:
I think he's using the GPS sensor for speed.
Do you have the gear variable showing up at all? In some recent versions of Analysis it appeared to have been removed (or was missing), so that might be why.
The only solution I'm aware of, and I'm not necessarily using the latest version of Analysis, is to download an older version... If you can find one...
Do you have the gear variable showing up at all? In some recent versions of Analysis it appeared to have been removed (or was missing), so that might be why.
The only solution I'm aware of, and I'm not necessarily using the latest version of Analysis, is to download an older version... If you can find one...
Monoposto 2000 - Reynard 883 Toyota
-
- Posts: 220
- Joined: Thu Mar 15, 2007 3:41 pm
- Location: Norwich, UK
- Contact:
Gear Not Calculating Correctly
Similar problem I think - I used to get the GEAR variable in Analysis calculated correctly - now it stubbornly displays 2 regardless of the actual gear
- my RPM and Speed (from GPS) traces look sensible
- my Gear Ratios and Wheel Circumference under Vehicle Options are correct
Somewhere amongst the software updates, this variable stopped working - what's going on
- my RPM and Speed (from GPS) traces look sensible
- my Gear Ratios and Wheel Circumference under Vehicle Options are correct
Somewhere amongst the software updates, this variable stopped working - what's going on
gears
Hi All,
I'm not really sure - it might just be worth upgrading your software to the latest from the web site. For a while gear was missing from the software, but this is back in now.
I loaded the sample run data in and the car file, and generated this graph:
This is displaying the gear that the software is calculating and the ratio between RPM and speed done as a user defined variable.
Kind regards,
Andy[/img]
I'm not really sure - it might just be worth upgrading your software to the latest from the web site. For a while gear was missing from the software, but this is back in now.
I loaded the sample run data in and the car file, and generated this graph:
This is displaying the gear that the software is calculating and the ratio between RPM and speed done as a user defined variable.
Kind regards,
Andy[/img]
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 181 guests