Megasquirt MS3 and 2 way CAN

whittlebeast
Posts: 1
Joined: Thu Jul 19, 2018 9:27 pm

Megasquirt MS3 and 2 way CAN

Postby whittlebeast » Fri Jul 20, 2018 11:26 am

If I want to use a Race Technologies Club to pass CAN info up to my Megasquirt and I want to pass CAN data from the MS3 to RT Club, what options do I need to purchase? Hardware, cables and or firmware?

Can firmware options be added to an existing unit later?

Andy

Support
Posts: 327
Joined: Mon Nov 21, 2005 4:09 pm

Re: Megasquirt MS3 and 2 way CAN

Postby Support » Thu Jul 26, 2018 7:38 am

Dear Andy,

To receive CAN data from the Megasquirt MS3 CAN ECU, you will require the following:

- DL1 CLUB - this will come with the correct firmware pre-installed.
- DL1 CLUB CAN Reveive Option License - this will come with our CAN interface cable.

Both of these can be purchased here - http://www.race-technology.com/gb/racin ... s/dl1-club. Important information on setting up this system can be found here - https://www.race-technology.com/wiki/in ... NInterface.

Best regards,
Tech Support (D)
______________________________
Posted by Race Technology Support


Return to “Pre-sales product questions”

Who is online

Users browsing this forum: No registered users and 2 guests