Multiple displays and video?

Bikey
Posts: 103
Joined: Fri Apr 29, 2011 6:05 am

Multiple displays and video?

Postby Bikey » Wed Jun 17, 2015 8:31 pm

Is it possible to use (2) Dash 4s and a Video 4 when using a single DL1 Mk3?

Thanks.

Support
Posts: 331
Joined: Mon Nov 21, 2005 4:09 pm

Postby Support » Thu Jun 18, 2015 9:09 am

Hi there,

Yes this is indeed possible with the correct connection hardware.

For this you would need to use the Race Technology YCable and the Race Technology DASH splitter cable.

The DASH splitter cable makes it possible to use 2 dashes in one system, one dash becomes the 'Master' unit and can be used to Start/Stop logging and control various functions of the DL1. The other dash becomes a 'Slave' unit. This is used purely for displaying data, and cannot be used to control the DL1.

Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support

Bikey
Posts: 103
Joined: Fri Apr 29, 2011 6:05 am

Postby Bikey » Thu Jun 18, 2015 2:56 pm

Great, thanks!

Bikey
Posts: 103
Joined: Fri Apr 29, 2011 6:05 am

Postby Bikey » Tue Jul 28, 2015 4:30 pm

One more setup to confirm:

(1) DL1 WP (main logger)
(1) DL1 MK3 Club (slave)
(2) Dash 4s
(1) Video 4

This will work with the following cables, correct?

Y-adapter cable - connects to main logger, one branch to Vid 4 and the other branch to Display Splitter cable, which then connects to Dash 4s

For connecting the DL1s to each other - must be done over serial (DL1 WP has dual serial ports), connecting serial port 1 on the DL1 Mk3 to serial port 2 on the DL1 WP.

And one more question:
- is it possible to log to the DL1 WP's memory while also logging on the Video 4? Only using the Vid4 would mean losing the ability to log at 1Khz, if I am not mistaken.

Thanks.


Return to “Pre-sales product questions”

Who is online

Users browsing this forum: No registered users and 3 guests