Buell motorcycle Data logging/ECU interface

t_gerrick
Posts: 1
Joined: Wed Jan 11, 2012 4:05 pm

Buell motorcycle Data logging/ECU interface

Postby t_gerrick » Thu Jan 12, 2012 4:39 am

I noticed that AMA motorcycle racer shawn higbee was using your data acquisition products with his buell motorcycles. Im looking to purchase a dash 2/dl1 combo and I was wondering if you have a ecu interface that can be configured to display/log serial data for a buell motorcycle.

The basic serial communication set up would be:
9600 bits per second
8 databits
1 stopbit
no parity
no flow control
TTL voltage levels (logical 0 < 0.8 volts, logical 1 > 2.0 volts)

Also I have the data request byte string and all the packet offsets for each data channel.

The ECU also has a CAN input/output, but I do not have any information about it's protocol.

Thanks for your time-

RTUSA
Site Admin
Posts: 455
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Fri Jan 13, 2012 4:32 pm

Hi -

This is Al Seim at Race Technology USA -

Could you please email me at aseim@race-technology.com so we can get in contact?

Thanks!
Al Seim
Race Technology USA

scausa
Posts: 9
Joined: Tue Sep 29, 2009 12:31 pm

Buell motorcycle Data logging/ECU interface

Postby scausa » Tue Jan 17, 2012 5:02 pm

Talking of motorcycles, there's any CAN protocol for DUCATI's ECUS (magneti)

Support

CAN protocol

Postby Support » Thu Jan 19, 2012 10:34 am

Hello,

We do not currently have any protocol information for Ducati ECU's. If you can find any protocol information please email it to me and i will be happy to help with the configuration files. kieran@race...

BR,
K

brt
Posts: 1
Joined: Sat Feb 25, 2012 10:05 pm

Postby brt » Mon Feb 27, 2012 3:39 pm

The only hints I've seen wrt Ducati ECUs so far are at http://www.aim-sportline.com/pages/download/stock_ecus/aim_ecu_ducati.htm .

Then there is a tool to read and set ECU maps but that doesn't touch on bus protocols. That's at http://ducatidiag.xooit.com/t1037-Basic-Instructions-by-a-new-user-for-new-users.htm . The map info also seems a work in progress.
[/url]

Aandreo92
Posts: 5
Joined: Mon Dec 14, 2015 11:18 am
Location: Russia

Buell motorcycle Data logging/ECU interface

Postby Aandreo92 » Tue Dec 15, 2015 2:33 pm

I was wondering if installaware had the ability to install a program and have it from the Windows ‘Data Execution Prevention’ check?

racetec
Site Admin
Posts: 277
Joined: Thu Oct 27, 2005 12:02 pm

Postby racetec » Wed Dec 16, 2015 11:02 am

Hi

I'm afraid the installer does not have the ability to do this.

Kind regards,
AH


Return to “Pre-sales product questions”

Who is online

Users browsing this forum: No registered users and 2 guests