Search found 78 matches
- Thu Jul 22, 2010 1:36 am
- Forum: Installation questions
- Topic: Video4 and missing channels
- Replies: 3
- Views: 8111
Video4 and missing channels
Using a Video4, DL1, CAN interface, Dash2 all wired as per the manual. The inputs from the DASH2 are not getting to the Video4. The Dash2 is configured for RPM, and A1-3 are OilTemp, OilPress, FuelPress, FuelLevel. The dash is working correctly and is reading items from the other devices such as Coo...
- Wed Jul 21, 2010 2:42 pm
- Forum: General software support
- Topic: Analysis Crashes in Windows 7 Pro 64 bit
- Replies: 3
- Views: 8074
- Wed Jul 21, 2010 4:00 am
- Forum: General support questions
- Topic: Logging restarts in the middle of a race.
- Replies: 12
- Views: 13628
Logging restarts in the middle of a race.
I've had this problem for a long time with the DL1 but now the Video4 is doing it too. Several times during a session the predictive lap times reset to 0:00:00 and start counting up as if it was a new session. Now with the Video4 it is starting a new session in the middle of a race with separate fol...
- Wed Jul 21, 2010 3:55 am
- Forum: General software support
- Topic: Analysis Crashes in Windows 7 Pro 64 bit
- Replies: 3
- Views: 8074
Analysis Crashes in Windows 7 Pro 64 bit
I recently upgraded my Thinkpad and it uses Windows 7 64 bit. Most of the time Analysis crashed when it loads the video (Video4). Crash dump is as follows... Any chance this can be fixed? Is there another codec I can substitute? Problem signature: Problem Event Name: APPCRASH Application Name: Analy...
- Sun Jul 11, 2010 4:55 pm
- Forum: Sensor-related questions
- Topic: Fuel gauge help
- Replies: 22
- Views: 33126
We had problems wiring dual senders in parallel. If one goes to zero, then the parallel resistance also becomes zero. This will give you impossible readings in high G corners. Wiring the senders in series resolves the problem. We use a 1K resistor with good results on BMWs. Rc = (R1 + R2) /2 except ...
- Sun Jul 11, 2010 4:43 pm
- Forum: General support questions
- Topic: Dash2 error
- Replies: 10
- Views: 15903
I'be has this problem recently with several units. The first time I reflash it messes up the unit. However, the second time I reflash it works perfectly. I am told it is virtually impossible to mess up the Dash2 with a reflash. So I keep trying and eventually it works. I suspect is might be to do wi...
- Tue Jun 15, 2010 4:10 am
- Forum: Installation questions
- Topic: 2 wire BMW ABS Sensors
- Replies: 1
- Views: 6592
2 wire BMW ABS Sensors
It seems my E36 BMW M3 has 3 wire ABS sensors for the front wheels but only 2 wire ABS sensors for the rear. I assume the 3 wire front sensors will work just fine. But is there an easy way to adapt the rear sensors? Or does anyone know a 3 wire replacement sensor that will fit the stock rear E36 fit...
- Fri Jun 11, 2010 2:44 am
- Forum: Installation questions
- Topic: New style CAN adapter wiring
- Replies: 1
- Views: 5878
New style CAN adapter wiring
Is it possible to power the previous Serial CAN adapter off the serial connector as with the newest CAN adapter? Of course you would need to also add the power wires to the terminator for reflashing/programming.
I'm looking to simplify as I rewire things.
I'm looking to simplify as I rewire things.
- Thu Jun 10, 2010 11:42 pm
- Forum: Installation questions
- Topic: Serial Cabling Schematic
- Replies: 2
- Views: 6812
Serial Cabling Schematic
Now that I have my DL1, Dash2, CAN interface, and Video4... I am going to rewire my cockpit. One thing that concerns me the the number of cables and connectors involved - including extension cables. I was thinking of making a custom wiring harness to run all the devices together without all the conn...
- Tue Jun 08, 2010 3:02 am
- Forum: General software support
- Topic: How to configure Predictive lap times on the Video4
- Replies: 4
- Views: 7905
- Mon Jun 07, 2010 11:55 pm
- Forum: General software support
- Topic: How to configure Predictive lap times on the Video4
- Replies: 4
- Views: 7905
- Mon Jun 07, 2010 2:53 am
- Forum: General software support
- Topic: How to configure Predictive lap times on the Video4
- Replies: 4
- Views: 7905
That's the thing. I son;t see any variables that look like lap times or SIM variables either. Exactly what are the called? I am using Video4 Config 2.2.71 from setup_7065. When I load the example layout NTSC\Example1.VGL, if I click on the controls for Predicted, Best, or Lap, the variable property ...
- Thu Jun 03, 2010 4:28 pm
- Forum: General software support
- Topic: How to copy elements between Video4 configs?
- Replies: 1
- Views: 5029
How to copy elements between Video4 configs?
How can I copy an element from one Video4 config to another? I see that I can load another config on top of the current config... But that seems to make a huge mess. It would also be nice if you could group elements together. The sample template dash layouts are very complex and fragile. It's easy f...
- Thu Jun 03, 2010 4:23 pm
- Forum: General software support
- Topic: How to configure Predictive lap times on the Video4
- Replies: 4
- Views: 7905
How to configure Predictive lap times on the Video4
What variables do I use for lap timing in the Video4 configuration software? I see there are some layouts that use them but they have no variable selected...
What's the secret?
What's the secret?
- Thu May 27, 2010 4:01 am
- Forum: General software support
- Topic: Video4 2nd source at 100%
- Replies: 4
- Views: 7417
Turns out it can not do it. Any chance we can have more options for scaling the 2nd to 4th videos? Again, I would like to have a very thin but very wide angle view across the top. With a very wide angle lens, I would want to crop it to a very thin section to show the action behind the car without ta...