We have a customer that has reported a problem with the connectors coming loose from the rear of his DL1, when installed in his Formula Ford. We haven't seen this problem before, but I made him this carbon-fiber connector clip to make sure the connectors stayed attached. It actually snaps into the u...

First, I would determine if the DL1 can be attached without affecting your current fuel gage. To do this, you will want to splice into the signal wire and attach that to a 12V input on the DL1. Verify that your existing gage doens't change (be sure to give it a few minutes). What you are doing is le...

Have you changed Compact Flash cards, or re-formatted them? I've seen this type of problem when using a compact flash card that isn't fast enough. It can also happen if the card is formatted FAT32 instead of FAT16. This often happens becuase FAT32 is the Windows XP default. When formatting cards, I ...

We use (and sell) the IR temp sensors from Solid State Racing, m When measuring tire temps from the front of a fendered car (especially one with little suspension travel like a sports racer), consider mounting the sensor above the wheel on the steering axis. The tire does not move in/out that much, ...

Based on a previous message by Al Siem, I did find some files in http://www.race-technology.com/Firmware/

I have flashed the DL1 and DASH1 to with those images successfully.

I downloaded V6.3.62, and don't find any firmware files for DL1 or Dash1. Do I need to download them separately? I thought they were normally included in the "OtherFiles" folder, along with the DL1_Flash utility.

What are the latest firmware revisions?