Search found 326 matches

by Support
Thu Sep 17, 2020 4:44 pm
Forum: General software support
Topic: Dash2 odometer/gear indicator not working
Replies: 4
Views: 12055

Re: Dash2 odometer/gear indicator not working

Hi Charlie - What version of firmware is your DASH2 unit running on? To find out, press and hold the DOWN button while the dash is powering up. Keep the button held until you see the firmware version number appear along the bottom of the display.

Best regards,
Support
by Support
Mon Jul 06, 2020 12:49 pm
Forum: General software support
Topic: Battery light staying on
Replies: 2
Views: 10111

Re: Battery light staying on

Hello Samueljon - No, the DASH2 already has a resistor built in. You need to do is connect the field/alternator warning terminal on the alternator, to the green/red wire on Connector A of the dash wiring harness. More information on wiring the dash into the vehicle can be located here: https://www.r...
by Support
Thu Jun 25, 2020 8:41 am
Forum: General support questions
Topic: Connecting Dash2 to Computer with v8.5
Replies: 4
Views: 12038

Re: Connecting Dash2 to Computer with v8.5

Hi zub, You are able to read the configuration back from the DASH2 if the firmware is version 10.0.0 or later . To find out which version of firmware is running on your DASH2, you need to: Press and hold the DOWN button, power up the unit keeping the button pressed and wait for the firmware version ...
by Support
Wed Jun 24, 2020 11:38 am
Forum: General software support
Topic: Connecting D2P to Rover Mems ECU
Replies: 6
Views: 25861

Re: Connecting D2P to Rover Mems ECU

Hello Keith - Dan here, it seems you didn't receive my last email I'll post it below so you can read it: Apologies for the delay, I had to stay off work after a COVID-19 test. I can see a couple of problems: 1) The Terminator lead should not be connected to Serial Port 2 i.e. RS232 (2) . This should...
by Support
Wed Jun 10, 2020 11:53 am
Forum: General support questions
Topic: Corner radius
Replies: 3
Views: 5978

Re: Corner radius

Hello,

Corner radius is automatically calculated in both V8.5 and V10. You may just need to enable in variable manager.

Please see below...

Image

Image
by Support
Thu May 21, 2020 10:57 am
Forum: General software support
Topic: ...overlay sprint/hillclimb runs in 8.5
Replies: 5
Views: 12422

Re: ...overlay sprint/hillclimb runs in 8.5

Hello,

Have you tried using the selection scratchpad? - http://www.race-technology.com/wiki/ind ... Scratchpad

Support (K)
by Support
Thu Apr 23, 2020 3:19 pm
Forum: Sensor-related questions
Topic: oil pressure sensor checks
Replies: 5
Views: 32612

Re: oil pressure sensor checks

Hello Anthony, If you have a question, why not email me directly like you have done many times in past, every one of which I have responded to? I'm sorry if this has somehow fallen short of your expectations. Temperature sensors have a potential divider resistor. The pressure sensors we supply do no...
by Support
Fri Mar 22, 2019 11:02 am
Forum: General support questions
Topic: GPS ROLLOVER
Replies: 5
Views: 10407

Re: GPS ROLLOVER

If there is an issue you can rest assured that it will be easily fixed with a firmware update for your DL1. We are looking into this now and will shortly inform you further.

Support (LW)
by Support
Thu Dec 13, 2018 10:08 am
Forum: General software support
Topic: How to show min/max value in a sector, Dash4Pro
Replies: 5
Views: 21529

Re: How to show min/max value in a sector, Dash4Pro

Hello, Using min/max in a formula allow you to see the min or max or a set of variables. For example... MAX(EGT1,EGT2,EGT3,EGT4) will display the hottest of the 4 EGT's. On the DASH4 it is possible to do it by using x in a user defined variable as the previous value. For example... If(EGT1>x,EGT1,x)...
by Support
Fri Oct 19, 2018 8:35 am
Forum: Installation questions
Topic: Dash 2 Pro fuse
Replies: 5
Views: 36059

Re: Dash 2 Pro fuse

Excellent thanks for the information, it seems the correct fuse rating has been used for your installation, this means there shouldn't be any internal damage caused to your DASH2PRO. From your first post it appears the issue is located within the CONN B connector itself or the connected wiring. Thi...
by Support
Thu Oct 18, 2018 2:54 pm
Forum: Installation questions
Topic: Dash 2 Pro fuse
Replies: 5
Views: 36059

Re: Dash 2 Pro fuse

Hello,

Can you firstly tell us the fuse rating(s) & if there is any other equipment connected to the DASH2PRO please? Thanks

Support(D)
by Support
Wed Oct 17, 2018 2:46 pm
Forum: General support questions
Topic: DL1 MK1 & DASH3LITE firmware - Shift Light Issue
Replies: 1
Views: 8407

Re: DL1 MK1 & DASH3LITE firmware - Shift Light Issue

Hello,

If you email us directly at: daniel (at) race - technology (dot) com, we'll be able to send you the latest firmware file for the DL1 MK1.

Support(D)
by Support
Mon Oct 08, 2018 12:36 pm
Forum: Installation questions
Topic: requirement for diodes in circuits.
Replies: 1
Views: 27694

Re: requirement for diodes in circuits.

Hello, The DASH2PRO has built in protection diodes, so there is no requirement to fit any on the dashes wiring. However we do expect the customer to fit the supplied fuse (0.5A / 500mA) into the dashes wiring. If unsure we offer a fitting service or you may want to consult a qualified electronics t...
by Support
Mon Oct 08, 2018 12:10 pm
Forum: General software support
Topic: MBE 9A4 to Dash2pro CAN profile
Replies: 1
Views: 10549

Re: MBE 9A4 to Dash2pro CAN profile

Hello, When a customer purchases a CAN receive license for a DASH2PRO, we send them a .CAN file & installation instructions via email. The .CAN file includes all of the CAN information the customer requires i.e. CAN IDs, CAN ID length, CAN baud rate, byte ordering, scale, offset etc. The customer t...
by Support
Fri Oct 05, 2018 2:05 pm
Forum: General software support
Topic: "Speed and distance options" for Dash 4 Pro
Replies: 3
Views: 22292

Re: "Speed and distance options" for Dash 4 Pro

Hello Charles, These options are only relevant when our DASH4PRO is connected to our SPEEDBOX product. They have no affect when using the DASH4PRO with our DL1 / RT LIVE data loggers. Additionally, if the second speed option is selected "processed speed" is used instead of "GPS speed" when availabl...

Go to advanced search