Cheers.

Would it be possible to enhance the documentation to include a section on the DL1 configuration files - including the overall config file, lap / sector file, var file ? etc. Things like names, folders, description, how and when used etc etc.

Assuming you are trying to download DL1 hex file... m then right click on the link "http://www.race-technology.com/Firmware/DL1/DL1V6.HEX" and click on save as... this will allow you to save the file onto your desktop or wherever. The "All files" option simply means dont append a file extension. Wor...

Once you have powered up the DL1 with a configuration file, do you need to keep the config file on the CF card or will the DL1 remember the configuration until it is replaced with another one from the CF card ?

Are the sensors 100% identical ?

Your best bet is to use something like this: http://www.race-technology.com/WebPage2/Products/Sensors/SteeringAngle.html You can try using the "pot and band" soultion, but the chances are that your steering column in enclosed within another column. The pot and band will also require fabricating the ...

I tend to use the option tab and break the circuit into sectors based on corners / straights, then add splits and any other as appropriate. Downside of this being you can't do is to reorder sector markers such that inserting a sector between two existings ones rather than appending it to the list in...

GPS accuracy is about 3 metres at best... you can get better but its going to cost lots of money.

I use my DL1 for sprinting as well. I find that to compare runs you muct place the start line marker about 3 metres up to the course as the GPS location drifts. Ditto the flying finish line. (You might need to load all runs for the day and set the start marker to encompass all start points - zoom in...

I would just like to give my appreciation to the all the staff at RT for the hard work and effort over the last few months that must have gone - new software, new devices, web updates, forums etc etc. It seems the company and product lines are going from strength to strength - long may it continue B...

IUsing excel...
http://www.geocities.com/calculatorhelp ... ograms.htm

You might need to change from frequency as a count to frequency as a percentage of total counts. Just create another coulm and divide by the total sum data items. Format cells to show as percentage.

HTH

What do you mean by "frequency %" ?

Its easy enough to create your own bar charts in excel... just export all samples of the relevant channel into excel and then use the chart wizard to create the chart accordingly.

Would it be possible to remove user "Band27" it seems all their messages have been auto generated

Would it be possible to allow uses to post files into a section on this forum ? eg relevant PDF's, example run data, example configs, external serial DLLS ?