Search found 301 matches

by Turby
Tue Jan 19, 2016 1:34 pm
Forum: How do I...
Topic: Data feed through to DL2 card
Replies: 1
Views: 1286

I dont think its possible as the DL2 stores timestamps in the capture log at 0.01 second resolution. Not sure what would happen if multiple samples were received for the same channel within the same timestamp. Another thing is the maximum data rate supported by the logger (see m), its limited to 115...
by Turby
Thu May 28, 2015 12:20 pm
Forum: Sensor-related questions
Topic: MagnetoResistive Active Wheel Speed Sensor
Replies: 3
Views: 3891

This is what Motec have to say on this type of sensor, you may some of info helpful in your quest

http://www.motec.com/filedownload.php/C ... docid=3634
by Turby
Mon May 18, 2015 1:11 pm
Forum: General support questions
Topic: Sensor/DL 1 Accuracy verification
Replies: 4
Views: 2861

You could use the monitor software to calibrate your thermocouple output over a known temp range eg 0 (ice water) to 100 (boiling water). is do your own calibration and see how it compares to the one expected
by Turby
Mon May 18, 2015 12:51 pm
Forum: General support questions
Topic: Sensor/DL 1 Accuracy verification
Replies: 4
Views: 2861

The DL1 simply records a voltage, its up to you to configure the analysis software / dash etc to convert this to something more meaningful. I developed my own twin channel thermocouple reader and it reads pretty much spot on over my intended temp range :)
by Turby
Wed Apr 22, 2015 3:03 pm
Forum: New hardware feature requests
Topic: Predictive lap timing
Replies: 25
Views: 26057

I'm very aware of the limitations of time/distance algorithms in predicting lap times. Which is why I asked the question - a vector based algorithm is much more accurate and can be made to run very efficiently on embedded controller without a floating point support. I believe its how one of RT compe...
by Turby
Wed Apr 22, 2015 2:30 pm
Forum: New hardware feature requests
Topic: Predictive lap timing
Replies: 25
Views: 26057

does it "predict" based on time / distance or does it use a time / GPS coords vector algorithm ?
by Turby
Tue Apr 21, 2015 2:00 pm
Forum: General support questions
Topic: track markers for snetterton 300
Replies: 4
Views: 2798

PM has not been enabled on this forum
by Turby
Thu Feb 26, 2015 11:26 pm
Forum: General support questions
Topic: DL1 serial buffer and ECU interface buffer size and speed
Replies: 5
Views: 3174

Do you have a picture / sketch showing how the DL1, ECU and arduino are connected together via serial bus ?

Are you using RS232 or TTL level signals from the arduino ?

What variant of DL1 have you got ?
by Turby
Wed Feb 04, 2015 1:46 pm
Forum: How do I...
Topic: Put 2 sensor data into 1 overview
Replies: 8
Views: 4689

I guess the solution is to have multiple quick XY graphs :oops:
by Turby
Wed Feb 04, 2015 1:36 pm
Forum: General support questions
Topic: Export to video with GoPro licence / Audio lag
Replies: 15
Views: 10958

As an aside the name of the latest analysis download is called Setup_8.5.0150 which is actually 8.5.320 - this probably causes a lot of confusion!

So not sure how you can obtain version 8.5.324 ?
by Turby
Wed Feb 04, 2015 1:21 pm
Forum: How do I...
Topic: Put 2 sensor data into 1 overview
Replies: 8
Views: 4689

I think you either have to show them individually or have to group them in one graph, you cant pick and choose what you want grouped / single. Which is a shame as it makes for poor use of screen space.
by Turby
Thu Nov 13, 2014 2:28 pm
Forum: Pre-sales product questions
Topic: Are indicator LEDs software controllable
Replies: 5
Views: 4358

As a matter of interest what PDU will you be using ?
by Turby
Wed May 28, 2014 12:38 pm
Forum: How do I...
Topic: Serial data format needed URGENTLY
Replies: 14
Views: 24824

You will have to decode all the RT Frames to extract the one(s) you are after. You will also have to enable the transmission of Raw GPS as well. I guess you are expecting to decode the raw NMEA sentences on your FPGA board ?
by Turby
Tue May 27, 2014 1:57 pm
Forum: Requested new features
Topic: Dash2 Pro Advanced Alarms, Green Shift Light Option
Replies: 5
Views: 4797

What about a small 4 layer shiftlight "daughter board" mounted to main PCB with simple connector system such as soldered PTH ? The daughter board having SMD RGB controller IC(s), SMD RGB leds etc

Go to advanced search