Search found 7 matches

by wil_h
Wed Aug 24, 2022 8:20 pm
Forum: General support questions
Topic: Dash 4 Pro - DTA T-Series - RPM Display
Replies: 1
Views: 22736

Dash 4 Pro - DTA T-Series - RPM Display

I'm trying to set up my DASH 4 Pro for my new DTA T-Series ECU (Previously using a different ECU). I've had the CAN adaptor updated (thanks RT) and I've re-configured the inputs for the new ECU. All the sensor inputs work (temperatures, pressures TPS etc.), but the RPM reading is just nonsense. The ...
by wil_h
Thu Jul 12, 2018 8:40 pm
Forum: General support questions
Topic: Boost Display/Logging - Dash 4 pro - DL1 Club, SC Typhoon ECU
Replies: 1
Views: 7922

Boost Display/Logging - Dash 4 pro - DL1 Club, SC Typhoon ECU

Hello I'm having trouble displaying and logging boost pressure (or manifold pressure) I'm using VAR3504 set to PSI on the dash. This gives a decimal output that seems to be a factor of 100 out. So 0.060 is displayed with 6psi applied to the MAP sensor (ECU). I could multiply it by 100, but that seem...
by wil_h
Wed Mar 07, 2018 11:01 am
Forum: Installation questions
Topic: DL1 Club - DASH4 PRO - ECU - Configure etc
Replies: 2
Views: 29846

Re: DL1 Club - DASH4 PRO - ECU - Configure etc

Removing the SD card worked. Annoying as it was the one supplied in the box.

A new SD card seems to work a treat.

Thanks
by wil_h
Mon Mar 05, 2018 2:39 pm
Forum: Installation questions
Topic: DL1 Club - DASH4 PRO - ECU - Configure etc
Replies: 2
Views: 29846

DL1 Club - DASH4 PRO - ECU - Configure etc

I have what I think is a pretty basic setup. DL1 club, output to a DASH 4 Pro with an ECU in the middle. The DL1 is an addition, as my previous setup was just the DASH 4 and my ECU, working fine. All I want is for the DL1 to read data from the ECU via the CAN, then splurge it out to the DASH 4. I ca...
by wil_h
Sun May 08, 2016 6:31 pm
Forum: General support questions
Topic: Displaying Gear from ECU
Replies: 4
Views: 9407

Re: Displaying Gear from ECU

Already tried that with both VAR channels mentioned, doesn't help.
by wil_h
Thu May 05, 2016 8:09 pm
Forum: General support questions
Topic: Displaying Gear from ECU
Replies: 4
Views: 9407

Re: Displaying Gear from ECU

Yeah, sounds simple. Its a CAN stream from the ECU. other channels like oil pressure, water temp, rpm etc work straight away (i.e. right click on display, select input in properties (VAR channel). But what is the CAN channel for the gear? It's not VAR_1024 as shown in the link, so which VAR channel ...
by wil_h
Thu May 05, 2016 9:04 am
Forum: General support questions
Topic: Displaying Gear from ECU
Replies: 4
Views: 9407

Displaying Gear from ECU

I'm trying to display the gear on mt DASH4PRO from my Specialist components Tornado ECU. I can see that there is a 'Gear (current gear)' in the standard variables, this is set up from the gear menu, using speed and rpm. I have set this up, but it doesn't work because there is no speed input from the...

Go to advanced search