Search found 5 matches

by jeffnickel
Thu Nov 02, 2017 10:00 pm
Forum: General support questions
Topic: DL1 Pro Not recording at 1KHz
Replies: 1
Views: 588

DL1 Pro Not recording at 1KHz

I have a DL1 Pro with the 1KHz ANA Upgrade. The unit configuration file is set to record 3 analog channels at 1KHz but I get 100Hz samples repeated 10 times. The RUN file shows 1ms data intervals but each 100Hz sample is simply repeated 10 times. Is this what the 1KHz samples means?? Not really an u...
by jeffnickel
Wed Apr 12, 2017 7:05 pm
Forum: How do I...
Topic: DL1 Pro not recording frequency
Replies: 1
Views: 649

Solved: DL1 Pro not recording frequency

After reformatting the SD card twice and loading config file the DL1 logged the data correctly.
Thanks,
Jeff
by jeffnickel
Wed Apr 12, 2017 5:23 pm
Forum: How do I...
Topic: DL1 Pro not recording frequency
Replies: 1
Views: 649

DL1 Pro not recording frequency

I am trying to setup my DL1 to record a wheel sensor on FREQ1 input. I have it on my bench with a 75Hz square wave input with 12V amplitude to Pin "T" of the 19 pin connector. I get no frequency data in the file. Also, the first three analog inputs do collect but only at 100Hx NOT at 1KHz ...
by jeffnickel
Fri Mar 04, 2016 11:15 pm
Forum: General support questions
Topic: No proper data/time of logged files.
Replies: 1
Views: 1385

No proper data/time of logged files.

I am logging accelerometer and analog data on a bench test rig I built and not interested in GPS data. The logged .RUN files are saved to the SD card but the data/time stamp on the files is some old default values. Am I correct to assume that the data/time stamp is taken from the GPS data? Or can I ...
by jeffnickel
Wed Feb 24, 2016 12:31 am
Forum: General support questions
Topic: DL1 - loging light on - Run file 675Kb created - BUT no data
Replies: 1
Views: 1115

DL1 - loging light on - Run file 675Kb created - BUT no data

Hi, I have a new DL1 and have hooked up the log switch. I used the default config file and logged for 4 minutes. The logging LED came on and a new log file was created. View .Run file in Analysis 8.5 but no data. Ran Manager says the run was 0.00s long?? Also shows this comment: " logging start...

Go to advanced search