I have 2 Stack Lambda gauges which output 0-5v lean / rich and have connected these to analogue 2 and 3 on my DTA S80 pro ECU. I cannot get the logger to log these channels ....problem is I am not sure if I have the setup wrong in the DTA or DL1 ! Using the DTA monitor software I can see the channel...

Osborni,

Thanks for your help .....

I got the logger working on my car in time for Silverstone .

Better news I got a win in race 1 ........

Used 3rd party video overlay to put onto in car video which is just brilliant !

http://vimeo.com/43562974

Thanks Simon

Thanks again ....

Found the problem ..... a duff switch !

I really should learn to check the obvious first !!

Thanks for the reply.... I have made a bit of progress .... I disabled pretty much everything ...however this did not solve the problem. Checked the DL1 using Monitor ..... looked like lots of things being logged by the DL1 including data from my DTA S80. So decided to reconnected the Dash ..... How...

I have connected Dash3 to DL1 and S80 using the CAN interface. I have connected a momentary push button switch to begin / stop logging and a LED to show logging status. With everything switched on it looks like things are functioning, but when I turn on logging the dash freezes. When I switch off it...