Thanks for response! I have redone the connections now, still no rpm on display. Seems like the DL1 is still working though, it logs as it should, writes it to CF-card and i can watch data in analyzer. Tries to do some reconfig on the DL1 to get my rpms, but the changes is not beeing loaded up when ...

Just connect the low connection to the wire that goes to the points or the non 12v side of the coil, then you will have to set the analysis up to read the rpm right depending on how many cylinders you have I have installed a DL1 mk2+ Dash 2. Wired and connected as described in this post. Dash 2 doe...