Search found 36 matches

by Rob Stevens
Thu Aug 13, 2015 7:19 pm
Forum: Pre-sales product questions
Topic: Serial Interface and Change of ECU
Replies: 2
Views: 6860

The serial interface can be re-flashed to read the s series, but I'm not sure if this file will be free. The serial interface for the DTA doesn't transmit vehicle speed. The CAN interface does transmit a single vheacle speed channel, this can be displayed on the Dash 2 I'm sure. I use the can interf...
by Rob Stevens
Fri May 01, 2015 9:27 am
Forum: General support questions
Topic: Unable to display data on some channels from ECU in Analysis
Replies: 3
Views: 3633

It would appear to be that I have a corrupt .var file so I'll have to create a new one. Thanks to Sam at Support for pointing to this.
by Rob Stevens
Thu Apr 23, 2015 7:48 am
Forum: General support questions
Topic: Unable to display data on some channels from ECU in Analysis
Replies: 3
Views: 3633

Unable to display data on some channels from ECU in Analysis

I have a DTA80 > CAN Interface > DL1 (mk2) > Dash 3 I just can't get the analysis software to decode some of the ECU transmitted data, this includes the voltage and Lanbda from the DTA, in the analysis variables it shows data is available, but when graphed its just a '0' flat line. I know both the c...
by Rob Stevens
Sun Apr 05, 2015 4:59 pm
Forum: Installation questions
Topic: Dash2 input buttons
Replies: 6
Views: 8738

Can I suggest that you measure what it the V on the Dash 2 switch before grounding, if its something like 5v I think you are good to go, if 12v I'd ask RT.
by Rob Stevens
Thu Apr 24, 2014 10:36 am
Forum: Installation problems
Topic: Dash2 & DL1 and battery voltage
Replies: 8
Views: 10776

DL1 Sport only does 0-12v on its analog inputs but is protected above this, but can't read it.
I use my ecu interface to transmit the voltage from the ecu up to the dash.
by Rob Stevens
Wed Jul 18, 2012 11:45 am
Forum: How do I...
Topic: Curborough
Replies: 3
Views: 4195

Hi Paul
I do, pm me your email and I'll ping it over, so long as you send me yours!
Rob
by Rob Stevens
Mon Jun 11, 2012 7:47 am
Forum: Installation problems
Topic: Logging DTA Analogue 2 and 3 output
Replies: 1
Views: 4124

I use a P8 and DL1 via RT serial interface, you will find that RT call Ana 1 something else like oil pressure and Ana 2 oil temp or something, works fine on my setup, but you should have you wideband on Ana3 that way dta can use the wideband also, P8 can only take 1v on its lambda input. But watch o...
by Rob Stevens
Thu Jun 07, 2012 12:19 pm
Forum: Bug reports
Topic: Media Converter Error
Replies: 11
Views: 11065

I have the same issue, its telling me the file has a resolution of 0x0
by Rob Stevens
Mon May 21, 2012 1:54 pm
Forum: Installation problems
Topic: Video Synchronizer working???
Replies: 7
Views: 8058

I had countless problems trying to make it work, gave up in the end and removed the LED from the module and mounted it remotely on a stick right in front of the camera so the led is huge in the cameras view, works fine now.

http://www.youtube.com/watch?v=5zNKpQldc2g
by Rob Stevens
Mon May 14, 2012 10:15 am
Forum: General support questions
Topic: Mk1 DL1 and Dash4pro
Replies: 5
Views: 4680

Was the dash 4 supplied as part of a package? if so it will only work with the unit it was supplied with.
by Rob Stevens
Sun Apr 08, 2012 6:50 pm
Forum: Sensor-related questions
Topic: Connecting multiple sensors that need +5 ref and GND?
Replies: 2
Views: 4092

You just split the 5v and earth as many times as you need it, simples
by Rob Stevens
Sat Apr 07, 2012 8:18 am
Forum: General support questions
Topic: How to extract DL-1 Serial Number from run file?
Replies: 1
Views: 2451

Load the file into the analysis software, go to 'Data'/Run Manager/General and in the Technical notes section you will find the logger serial number
by Rob Stevens
Wed Feb 29, 2012 10:27 pm
Forum: Installation questions
Topic: RPM on a coil and distributor setup
Replies: 6
Views: 8100

Just connect the low connection to the wire that goes to the points or the non 12v side of the coil, then you will have to set the analysis up to read the rpm right depending on how many cylinders you have
by Rob Stevens
Fri Feb 24, 2012 3:48 pm
Forum: Installation questions
Topic: Auto start/stop settings for a rally car?
Replies: 4
Views: 5062

I use a momentary switch an a led to turn the logger on and off when I want, works great, you will find how to wire it in the help section
by Rob Stevens
Fri Feb 17, 2012 4:23 pm
Forum: How do I...
Topic: Data Alignment Issues
Replies: 10
Views: 9082

Try enabling the wheel speed option, this should help the speed/distance/gps accuracy, however I've only noticed a slight improvement, also check to see if vibration might be corrupting your acceleration data. I assume autocross is like our sprinting, one car at a time not on a circuit, a sprint?

Go to advanced search