Search found 14 matches

by ScienceofSpeed
Wed Apr 23, 2014 10:26 pm
Forum: General software support
Topic: Dash2 & DL1 and battery voltage
Replies: 8
Views: 19294

Dash2 & DL1 and battery voltage

Configuration: Dash2 & DL1 Sport.

I've read that the DL1 can stream battery voltage. When I apply +12V to one of the 0-12V inputs on the DL1, that channel reads ~30V. What is the procedure to do this?
by ScienceofSpeed
Wed Apr 23, 2014 10:20 pm
Forum: General software support
Topic: Dash2Pro & Serial Data
Replies: 6
Views: 14523

hi Martin -- I am sorry, I should have been more specific. This is regarding another vehicle using Dash2 and the same AEM Serial adapter. The analog 21-28 is being read through Lite Monitor, however the drop down in the Dash2 Configuration tool does not have the same analog list.
by ScienceofSpeed
Mon Apr 21, 2014 3:26 am
Forum: General software support
Topic: Dash2Pro & Serial Data
Replies: 6
Views: 14523

This is a follow up on this question. I am using analog inputs 21-28 as shown here: m In Lite Monitor, the voltage readings from these analogs are displayed appropriately. However, the drop down list in the Dash2 Configuration tool does not have a "analog 21, 22, 23, etc". How are these ma...
by ScienceofSpeed
Thu Oct 17, 2013 7:36 pm
Forum: General software support
Topic: Dash2Pro, CAN, & AEM EMS setup helpful tips
Replies: 3
Views: 18842

Dash2Pro, CAN, & AEM EMS setup helpful tips

With RT USA's help, we were able to successfully get the AEM EMS and Dash2Pro communicating through CAN. The KB has an article here, however, it is somewhat disjointed and difficult to follow. m Here are some quick step by step instructions that I think will help someone with the same setup. If this...
by ScienceofSpeed
Thu Oct 17, 2013 6:26 pm
Forum: General software support
Topic: Dash2Pro & Serial Data
Replies: 6
Views: 14523

Thanks Martin, I did not know this existed. Here's the link for future reference:
http://www.race-technology.com/wiki/ind ... ype/AEMECU
by ScienceofSpeed
Thu Oct 10, 2013 7:31 pm
Forum: General support questions
Topic: AEM EMS serial interface
Replies: 5
Views: 8131

FYI: Al with RT USA provided a reflash file for the serial adapter "AEM customer reflash file 101110.hex" and this cured the problem.
by ScienceofSpeed
Thu Oct 10, 2013 5:27 pm
Forum: General support questions
Topic: AEM EMS serial interface
Replies: 5
Views: 8131

hi Kieran -- have you been able to review the file? I have verified that the AEM is outputting serial data, but the RT serial adapter is not.
by ScienceofSpeed
Mon Oct 07, 2013 6:27 pm
Forum: General support questions
Topic: AEM EMS serial interface
Replies: 5
Views: 8131

Thank you for your reply.

Yes, Lite Monitor is set to 115,200. No data displays. When I connect the PC directly to the ECU and monitor the port using PUTTY, I do get data (shown here):
https://www.dropbox.com/s/k3de4hn7n22pi ... %20ECU.log

When plugged in to the serial adapter, there is no data.
by ScienceofSpeed
Wed Oct 02, 2013 1:30 am
Forum: General software support
Topic: Dash2Pro & Serial Data
Replies: 6
Views: 14523

Dash2Pro & Serial Data

It is unclear to me how in the Dash2Pro configuration software how serial data channels from the ECU serial interface are mapped to variables to display on the Dash2Pro. I see under "Variable Sources", Analog 5 and up can be configured to a specific serial source. However, I do not underst...
by ScienceofSpeed
Wed Jul 03, 2013 9:12 pm
Forum: General support questions
Topic: AEM EMS serial interface
Replies: 5
Views: 8131

AEM EMS serial interface

Received a Dash2Pro and AEM EMS serial interface. The serial interface is not working. We have the ECU configured identically to this: m The configuration is configuration 5 "ECU & Computer" monitoring with Lite Monitor. Configuration is as shown in booklet, serial data output is conne...
by ScienceofSpeed
Fri Nov 05, 2010 7:52 pm
Forum: General support questions
Topic: AEM interface configuration
Replies: 12
Views: 20523

hi Andy --

Kieran e-mailed a new flash for the AEM interface. The datastream can now be read with the exception of engine speed and boost pressure. I have e-mailed him the screen shot from Lite Monitor as well as the datastream output.

thank you,
-- Chris
by ScienceofSpeed
Tue Oct 26, 2010 6:28 am
Forum: General support questions
Topic: AEM interface configuration
Replies: 12
Views: 20523

Here are screen shots to verify: AEM telemetry settings: http://scienceofspeed.com/public/RT/aem_telemetry.gif Lite Monitor - this was with the "DL1 and PC Monitor" configuration - shows communication with DL1 is good, but no serial output: http://scienceofspeed.com/public/RT/screen-shot--...
by ScienceofSpeed
Tue Oct 26, 2010 6:19 am
Forum: General support questions
Topic: AEM interface configuration
Replies: 12
Views: 20523

Per Stratocaster's recommendations (thanks Jeff!) I have done the following: 1. confirmed AEM EMS is setup properly. 2. connected PC directly to AEM EMS and monitored serial traffic with TTY application - confirmed AEM EMS is outputing telemetry. 3. connected AEM to RT serial adaptor, and configured...
by ScienceofSpeed
Sun Oct 24, 2010 12:00 am
Forum: General support questions
Topic: AEM interface configuration
Replies: 12
Views: 20523

I am having a similar issue. My configuration consists of the AEM EMS, DL1, and laptop with Monitor software. DL1 is has current firmware, and cabling is installed as shown as "configuration 4" of the serial interface manual. I have configured the telemetry options of the ECU as described ...

Go to advanced search