Search found 13 matches

by sdimm
Fri May 13, 2011 10:41 am
Forum: General software support
Topic: Contour HD 1080P for overlay with DL1 and RTs software
Replies: 1
Views: 6044

Contour HD 1080P for overlay with DL1 and RTs software

Hi! I want to get the video from my ContourHD to work with my DL1 for overlay but are having problems with the formats. The ContourHD outputs a 1280x720 30p H.264 file but in the VD4converter the formats are not HD! Its like 1024x568 and some other for NTSC. The video looks right in format with the ...
by sdimm
Mon Jun 22, 2009 9:41 am
Forum: General software support
Topic: Lap and Sector screens change on Dash3
Replies: 8
Views: 12754

This is possible. If you only have a lap marker and skip the sector markers in the DL1/DL2 configuration then just the lap time will be displayed. If you want to perform sector analysis after wards, it is easy to set up sector markers in the Analysis software ok, so it has to switch automaticly on ...
by sdimm
Fri Jun 19, 2009 8:56 pm
Forum: General software support
Topic: Lap and Sector screens change on Dash3
Replies: 8
Views: 12754

Lap and Sector screens change on Dash3

In the manual it says the following. "DASH3 switches to the Lap or Sector screen automatically at the end of a lap or a sector respectively." Is there a way to turn off so that the Dash3 doesn´t change to the "Sector" screen but still change to the "Lap" screen automat...
by sdimm
Sat May 23, 2009 9:41 pm
Forum: General software support
Topic: Problem with Laptimer in Dash3/DL1 combination
Replies: 16
Views: 26622

Okey, so changed the configuration and tested it out on the street a few days ago. Then it worked fine and I could set sectors and lapmarkers and it showed times on the Dash3. Now however when the team was on a race this weekend it didn´t work again... It´s getting really frustrating to not have ...
by sdimm
Sat May 23, 2009 4:46 pm
Forum: General software support
Topic: Problem with Laptimer in Dash3/DL1 combination
Replies: 16
Views: 26622

Okey, so changed the configuration and tested it out on the street a few days ago. Then it worked fine and I could set sectors and lapmarkers and it showed times on the Dash3. Now however when the team was on a race this weekend it didn´t work again... It´s getting really frustrating to not have i...
by sdimm
Tue May 19, 2009 3:21 pm
Forum: General software support
Topic: Problem with Laptimer in Dash3/DL1 combination
Replies: 16
Views: 26622

Hi, At first glance it seems that the DL1 is not configured to send the GPS data to the DASH3 via the serial cable. Have a look at our knowledge base http://www.race-technology.com/wiki/index.php/ConnectionToOtherHardware/DL1ConfigForDASH and see if your DL1's settings are the same. Hi, thanks for ...
by sdimm
Tue May 19, 2009 12:32 pm
Forum: General software support
Topic: Problem with Laptimer in Dash3/DL1 combination
Replies: 16
Views: 26622

Problem with Laptimer in Dash3/DL1 combination

Hi, I have a DL1 connected to a Dash3 and have problems with it showing the laptimes. So, were running on a track for the first time and I recorded some laps which I then imported into the Main Analys software to set the sectors and lapmarker. It works fine in that program but then the problems begi...
by sdimm
Sat Apr 11, 2009 1:19 pm
Forum: General support questions
Topic: change from voltage to another unit?
Replies: 4
Views: 7472

osborni wrote:Whatever you want. It's just a simple regression.


ok, thanks you very much for the help.
by sdimm
Sat Apr 11, 2009 11:21 am
Forum: General support questions
Topic: change from voltage to another unit?
Replies: 4
Views: 7472

You define a customer formula using the Variables Manager > Sensor type/units > Custom radio button > Calculate Formula from Values. For 0.54 v input enter 0 Output For 4.5 v input enter 100 Output Then in Units to Display enter "%" You can use the calc formula entry to do non-linear form...
by sdimm
Tue Apr 07, 2009 2:33 pm
Forum: General support questions
Topic: change from voltage to another unit?
Replies: 4
Views: 7472

change from voltage to another unit?

hi, So I have a megasquirt connected to a dl1 mark2 with throttle position via the analoge connection at 5v. So at 0% throttle it gives 0,54v and at 100% it is at 4,5v. So what I want to do is change so that I see percentage insted of the voltage in the valuetable and in the graphs, and also to be a...
by sdimm
Tue Apr 07, 2009 8:52 am
Forum: General support questions
Topic: Can the dl1 be connected while starting engine?
Replies: 1
Views: 4590

Can the dl1 be connected while starting engine?

Can the dl1 be connected while starting engine?
A guy tells me that it can´t because of the voltagechanges that happends. I have it connected to a mx5 right now and have it turned off while starting the engine.
by sdimm
Fri Feb 13, 2009 9:59 am
Forum: General support questions
Topic: dash3 configuration
Replies: 7
Views: 11266

dash3 configuration

What special cable do I need to connect the Dash3 for configuration? is it just a split serial so I can have the dl1 connected to the dash 3 and also to the computer?
by sdimm
Wed Feb 11, 2009 8:31 am
Forum: General support questions
Topic: Can I have your data please?
Replies: 9
Views: 78449

Hi, looking for some data that has rpm input logged. Would be great if it also had throttle but especially the rpm input.

If you have and can share please send it to me at mail.stahre (at) gmail.com

Go to advanced search