Hi, Firstly you have to know your tyres diameter. Then just make two new user defined variables on Analysis software. Go -> Data -> Variable Manager -> User defined variables. If you are using hertz for freq 1 and 2 and you want to see your speed in kph, then the formulas should look something like ...

I have also same kind of problem. I use V37 firmware and I can't get any rpm information on my dash2? If I analyse logged .run file there is only some strange constant 500 rpm reading. The rpm signal is nice square wave and if I connect that to the frequency input that works as it should be! Some he...

Hi!

I'm having exactly the same problem The old AP-22 and ver. 1.0.5 DCAT software.

Any ideas?

Thanks

Make sure that the external (RS232) speed is turned on from main menu item "speedo and rpm".

Can anybody (support?) specify how the RPM filtering operates on the dash2 configuration tool? In the knowledge base it reads "Maximum rate of change (in RPM per sample)" and configuration tool says "Maximum rate of change (in RPM per 1/10th of a second)" and in my view they aren...

The first green LED can be set to operate as a logging status indicator and that's why you only have five LEDs to show rpm. Check if "Status display" is enabled and turn it off.

Hi! I have also problem using lap timing with DL1/DASH2. I have done the .LAP -file in the analysis software in correct 8.3 format and put it to the root directory of my menory card. It is also the only .LAP file in the card, but the lap timing doesn't work When I start logging with GPS lock, it rea...