Hi,

I am configuring the software to process the data from the IMU. I see that there are two dll for 2g and for 10g. My IMU is 2g. Is there any difference between the two dll for 2g IMU's.

thank you.
Juan

Hi again,

I have found a copy of the serial number. It is 10032.

Thank you

Hi,

I cannot give you the serial number because I have just send you today the device to be repaired due to a problem. I can send you via email a copy of the packing list I received when I bought the device.

Regards,

Hi,

I have a DL2 20 hz. I have just installed The V8 of the analysis software but I can not process the data at the frequency of 20 hz. A message to conctact you is shown.

Thank you.

Hi, When I try to display the number of sats locked vs time I always have 0, I don't know why this happens. The setup on the DL2 is enabled for all the GPS variables and the variable manager is also configured to obtain the GPS sats variable. The speed and position obtained are ok. Thank you. Juan

Hi, I have a 20 hz DL2. When I installed the V.6 of the Analysis Software I had to change the code.bin file just to use the post-processed 20Hz-data in the GPS options. Now, with V.7 I don´t have this option and I don´t know if I have to change the codes file or not. How can I know if the softwar...

Now it works ,

with my start/stop buttons connections are:

Black - GND D
White - Start logging C
Yellow - status O/P L
Red - power in G

thank you,

Hello, I have a DL2 and I want to use an external start/stop button. I can start and stop sampling by grounding pin C of Conn-2. But I don´t know where do I have to connect the wires of the button to switch on the led. I tried connecting the yellow wire to pin D and the red one to pin L, but it doe...