Brake Pressure Sensor
This brake pressure sensor is specifically designed for measuring the high pressures in automotive braking systems. It is extremely robust and resistant to brake fluids, mineral oils, water and air.
|Pressure range (bar)||0 to 260|
|Pressure reference type||absolute|
|Max. pressure||320 bar|
|Operation temp range||-40 to 130°C (140°C)|
|Media temp range||-40 to 130°C (140°C)|
|Storage temp range||-30 to 60°C|
|Male thread||M10 x 1|
22Nm in steel
32Nm in aluminium
|Weight w/o wire||35.2g|
|Power supply||4.75 to 5.25 V|
|Max power supply||16 V|
|Full scale output||10 to 90% of supply V ratiometric|
|Load capacity||10 nF|
|Output resistance||10 Ω|
+ 1 % (0 to 100°C)
+ 1.5 % (-40 to 0°C and 100 to 130°C)
|Sensitivity||15mV/bar at 5V supply|
|Offset||500mV at 5V supply|
Note: All data are typical values
Design and function
The sensor is specially designed to measure absolute pressure in gasoline direct injection applications. This sensor is also compatible with other kind of fluids e.g. Diesel, engine oil, transmission oil or brake fluid. The sensor uses a thin layer technique to achieve high accuracy pressure measurements. The stainless steel measuring cells with piezoresistive bridges are hermetically welded with stainless steel pressure ports. The internal reference ensures ambient pressure independent measurements.
The main benefits of this sensor are its high accuracy, its wide measurement range and its robust and compact design.
For further information on the brake pressure sensor please visit our Knowledge Base here
† - note that the price is set in GBP, the exact amount charged to your card may vary according to your banks exchange rate.
* - Main product required.c
There are no products selected to add to the basket. Please select a product by ticking the relevant box.